FAG QJ320-N2-MPA-T42A Angular Contact Ball Bearings

G:M 30x1.5; B2:15 mm; B:100 mm; Mass cam follower:1.95 kg; d:30 mm; C:35 mm; D:90 mm; Limiting speed:1800 r/min; Lubrication adapter:AP 14; Fatigue load limit Pu:9.5 kN;

A2:89.297 mm; Pa:3.47 kN; P90°:17.3 kN; Bearing limiting speed:9500 r/min; R1:30.163 mm; End plug (suffix Y):EPR 4; Cap bolt recommended tightening torque:61 N·m; P120°:11.1 kN; PG:1/8 NPT; Stabilizing ring:SR-10-0;

L:419.1 mm; ba:51.594 mm; Ca:62.789 mm; P180°:72.5 kN; Cap bolt recommended tightening torque:298.3 N·m; Housing:SSAFS 026 KA; Stabilizing ring:2 x 38151-26; Cap bolt, SAE grade:8; R1:73.025 mm; Cap bolt:5/8-11 UNC;

Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:138000 N; D:160.0000 mm; Oil Speed Rating n2:5000 rpm; Fillet Radius ra:2.00 mm; d:75.000 mm; Basic Static Radial Load Rating Co:114000 N; Grease Speed Rating n1:3900 rpm; B:37.00 mm;

Grease Speed Rating Open/Shielded n1:3200 rpm; B:52.00 mm; Basic Dynamic Radial Load Rating C:174000 N; d:85.000 mm; D:210.0000 mm; Oil Speed Rating Open/Shielded n2:3800 rpm; Basic Static Radial Load Rating Co:137000 N; Fillet Radius ra:3.00 mm; Accessories:Two Seals; Sealed Speed Rating n3:2200 rp

Dimension N:19.8 mm; Dimension S1:19.8 mm; Dimension C:66.7 mm; Width A:34.9 mm; Dimension L:90.5 mm; Dimension D2:55.5 mm; Basic Static Radial Load Rating Co:7800 N; Insert Bearing IB:Stainless Steel; Dimension B:79.4 mm; Shaft Diameter D:25 mm;

d:170 mm; Mass adapter sleeve assembly:7.3 kg; d1:150.813 mm; B1:122.86 mm; B4:30.175 mm; B:27.254 mm; Lock washer:W 034; Lock nut:N 034; Threads per inch:8; d3 max.:200.152 mm;

Old MRC Bearing Number:206FS; Basic Interchange BCA:8506; Width - Overall B:20.0 mm; Fillet Radius ra:1.00 mm; Width - Inner Ring B1:19.00 mm; Speed Rating-Single and Double Sealed Grease SDG:7500 rpm; d:30.000 mm; D:62.0000 mm; Basic Radial Load Rating-Dynamic DC:19500 N; Width - Outer Ring B0:16.0

da:101.6 mm; L:387.35 mm; R2:30.163 mm; P150°:48 kN; A2:155.575 mm; Eye bolt:2 x 3/8-16 UNC; PosiTrac Plus contact element:2 x B10724-161; Mass pillow block:39.5 kg; Max. speed for PosiTrac Plus seal:1350 r/min; Housing:SSAFS 024 KA;

TypeStorage Holders & RacksUseFoodMaterialMetal, Iron/Stainless steel 201/Stainless steel 304Metal TypeStainless SteelPlace of OriginGuangdong, ChinaFeatureEco-Friendly, StockedApplicable SpaceKitchenInstallation TypeStanding TypeClassificationNon-folding RackNo. of TiersSingleProduct nameRectangle

End plug (suffix Y):EPR 18; Housing:SAF 534; P90°:140 kN; H2:69.85 mm; Cap bolt:4 x 3/4-10 UNC; Bearing:22234 CCK/W33; Eye bolt:2 x 3/8-16 UNC; Bearing limiting speed:2600 r/min; h:54.769 mm; Appropriate attachment bolt size G:1 in;

Calculation factor kr:0; D:370 mm; Mass bearing:77.2 kg; Basic dynamic load rating C:2330 kN; d:260 mm; s:3 mm; F:292 mm; r3,4 min.:3 mm; Basic static load rating C0:4650 kN; r1,2 min.:3 mm;

A2:126.603 mm; Labyrinth ring:2 x LOR 45; Cap bolt:2 x 5/8-11 UNC; Appropriate attachment bolt size G:0.75 in; Bearing limiting speed:6000 r/min; Mass pillow block:16.3 kg; da:69.85 mm; P150°:26.7 kN; R2:21.431 mm; P180°:31.6 kN;

d1 ≈:1025 mm; d:939.8 mm; Calculation factor e:0.33; Calculation factor Y2:3; Calculation factor Y1:2; Comparative axial load rating CFa:1390 kN; r1,2 min.:4.8 mm; Calculation factor Y0:2; r3,4 min.:12.7 mm; Basic static load rating C0:95000 kN;

Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:32500 N; Accessories:One Shield; B:19.00 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; Grease Speed Rating Open/Shielded n1:6200 rpm; D:85.0000 mm; d:45.000 mm; Basic Dynamic Radial Load Rating C:39300 N;