KAWASAKI 705-52-30040 HD Series Pump

b:13.2 mm; Da max:279.8 mm; Y0:2.94; Nlim:2,400 rpm; d2:213.4 mm; Characteristic cage frequency, FTF:0.44 Hz; Characteristic outer ring frequency, BPF0:11.1 Hz; d:190 mm; Characteristic rolling element frequency, BSF:8.75 Hz; k:6 mm;

Cg - Geometry Factor8:0.1391; Bore Taper:1/12; Reference Thermal Speed Rating (Oil)7:900; Bearing Weight:108.3 Kg; Reference Thermal Speed Rating (Grease):770; Y1 - ISO Factor5:4.38; B - Inner Ring Width:134 mm; C1(2) - Dynamic Radial Rating (Two-Rows):2840000 N; Cage Type:EMB; R - Inner Ring To Cle

Designation of open end cover:SCOU212-38; Designation of closed end cover:SCC212; s1:32.55 mm; Recommended tightening torque for set screw:16.8 Nm; C:52.5 kN; T max.:100 °C; Weight:1.85 kg; T min.:-20 °C; C0:32.8 kN; A5:39.7 mm;

Lockwasher and Lockplates:W-12; Sleeve Weight:0.50 lb; Diameter d:60 mm; Tolerance1:-0.10 mm; Series:223K; Bearing Number:22313K; Sleeve:SK-6523; Removal Nut O.D. C:98.55 mm; a:3.50 mm; Removal Nut:AN-15;

A2:48.4 mm; C0:15.2 kN; T min.:-20 °C; Designation of closed end cover:SCCE207; S:9.5 mm; Z:58 mm; Weight:1.37 kg; N:15mm; L:90 mm; e:19 mm;

Seal Type:Aluminium Triple Lab; Dimension L:13.0 in; Support Type:Round Flange; Shaft Size:9.75 in; Dimension H:7.1 in; Dimension R:31.3 in; Cor - Static Load Rating:626992 lbf; Bolt Size:4 x M24; Bearing Number:HSE912BX; Dimension T:35.0 in;

Housing Width:6.5 in; Dimension J1 :18-1/2 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension L :21-3/4 in; Shaft Size:5.5 in; Seal Type:Viton Single Lip; Bearing Type:Split Cylindrical Ex; Support Type:Four-Bolt Plummer Bl; Bearing UPC:013992027306; Cr - Dynamic Load Rating:95

r:2; S:19.8 mm; C0:24 kN; m:8 mm; Weight:1.08 kg; B1:57.1 mm; Recommended tightening torque for set screw:22 Nm; C:28 mm; B:41.3 mm; T min.:-20 °C;

s1:21.45 mm; T min.:-40 °C; Designation of closed end cover:SCC207; d:35 mm; C0:15.2 kN; Recommended tightening torque for set screw:11.5 Nm; P:230 mm; A1:12 mm; Weight:1.68 kg; N:22mm;

H1:10 mm; A1:18 mm; N1:19 mm; L1:38 mm; L:125 mm; Designation of bearing:ES202-10G2T20; G:M6x1; A:30 mm; d:15.88 mm; Weight:0.43 kg;

L1:65 mm; H:125 mm; A:27 mm; T max.:100 °C; s1:17 mm; J:98 mm; B:34 mm; N:12mm; L:68 mm; G:M6x1;

T max.:200 °C; C:35.1 kN; A1:16 mm; s1:25.8 mm; C0:23.2 kN; L:115 mm; N:19mm; e:22 mm; J:157 mm; H:197 mm;

b max:2.2 mm; r1s min:1.1 mm; E:76.5 mm; F:54.5 mm; DbN min:93 mm; Snap ring reference:R85; Fatigue limit load, Cu:8.4 kN; Min operating temperature, Tmin:-20 °C; Ca min:4.67 mm; Brand:SNR;

H:54.2 mm; G:M6x1; T min.:-40 °C; C0:20.8 kN; C:31.85 kN; S:10.2 mm; E:25 mm; Designation of bearing:US209G2T04; d:45 mm; B:41.2 mm;

Designation of bearing:UC211-32G2T20; N:35mm; C0:29.2 kN; Recommended tightening torque for set screw:16.8 Nm; C:43.55 kN; G:M6x1; SW:4.76 mm; L2:19 mm; H1:130 mm; S:22.2 mm;